Step1: Seperate the W-1206V and W-1206T Attach Angles by removing the joining material.
Step 2: Mark, then separate the W-1210B Rib Doublers by removing the joining material.
Builders note: The parts were then etched and alodined before priming.
Sunday, April 24, 2011
RV-12 Spar Assembly (Part 1)
Reference: page 13-02; 2.0 hours
Step1: Seperate the W-1206V and W-1206T Attach Angles by removing the joining material.
Step 2: Mark, then separate the W-1210B Rib Doublers by removing the joining material.
Builders note: The parts were then etched and alodined before priming.
Step1: Seperate the W-1206V and W-1206T Attach Angles by removing the joining material.
Step 2: Mark, then separate the W-1210B Rib Doublers by removing the joining material.
Builders note: The parts were then etched and alodined before priming.
Posts
